Open Mon-Fri, 8-5 PM PST with limitations. Learn More
Considerations in Mask Printing – Learn More
Item Number: RUT-WB9067-01
WB9067 Discharge White Plus– WB9067 Discharge White Plus–Discharge White Plus is used as an underlay to enhance the brilliance of colors where garments are not completely discharging. User must add 3% to 6% of WB0259 Discharge Agent to activate the white. Only activate enough products to run 3 to 4 hours. The additive should be mixed into the base with a high speed drill and or a homogenizer.
Mix colors using the formulations provided in the M2007 Ink Management Software. You may need to upgrade your version of the software to get the WB-99 formulations. Mixed WB-99 PS colors may be printed from 86—305 mc. in. (34—120 mc. cm.) mesh range. The tack free formulation allows increased coverage; therefore, finer mesh counts may be used for softer hand with minimum loss of color brilliance. Mix colors according to the desired color formula for best results.
Note: For better color matches it may be necessary to hold the white out of very dark saturated shades. Colors should be checked through a 156 mc. in. (62 mc. cm.). Colors will be lighter through finer mesh.