ER600C Emulsion Remover - 5 Gallon

ER-600C is a biodegradable and odorless, low foaming, sprayable liquid emulsion remover for all types of stencil systems. This product may be used straight for maximum effect or diluted 1 part product up to 4 parts water for better economy. When this product is used emulsion and diazo staining are greatly reduced!

• Use a Ink Card Scrapper to remover ink from screen then clean of excess ink with ink wash.
• Use straight or dilute 1 part of ER-600C with up to 4 parts water for more economy.
• Apply ER-600C to both sides of wet screen using a Spray Bottle and scrub with a Soft Bristle Brush.
• Using a Washout Hose on the low-pressure shower setting, rinse the mesh. If you are using capillary films this product will produce a sheeting action.