Open Mon-Fri, 8-5 PM PST with limitations. Learn More
Considerations in Mask Printing – Learn More
Item Number: RUT-ES0221-01
ES0221 NPT Glitter Base is designed to enhance the look of glitter flakes when printed onto textiles. Glitter flakes are normally slightly subdued because of the clear base that surrounds the flakes. ES0221 will shrink away from the flake causing the sparkle to be more brilliant
Features
ES0221 Glitter Base allows addition of up to 15% glitter flakes. Print through appropriate mesh for the size glitter flake being used. Print with a sharp edge, medium durometer squeegee, with heavy pressure. The heavy pressure allows the base to shrink away from the flake. Cure at 320ºF (160ºC.).
Wash test garment to insure good adhesion. Too much print pressure can cause too little base to be on the surface for a good adhesion to the flake.
Note: Some minor flake off is normal because some of the flakes can break off when first rubbed.