K2944 THICKENER #3 LIQUID-1G

K2944 THICKENER #3: Highly concentrated liquid thickener to increase viscosity and body of plastisol inks. Mix Thickener #3 at 0.5 - 1% by weight (MAXIMUM) . Be sure to weigh the amount precisely, as an over addition can dramatically reduce printability. Stir thoroughly using a low sheer mechanical mixer or by hand. Do not over mix to the point of creating friction (high heat) as it could cause the plastisol to gel causing lumps. After mixing, wait a minimum of 2 hours before printing or testing for viscosity.