CASH & CARRY NOW OPEN 8 AM - 4:30 PM
For mixing colors with the C3 Color boosters, Rutland LC0209 Chill LC Mixing Base is a non-phthalate, low-bleed, and low-cure base. The LC0209 is intended for use with both manual and automatic printers to print on polyester.
Mix with Rutland™ C3 colors Supple hand and excellent elasticity
Matte finish with low surface tack
Low temperature cure from 270°F - 320°F (132°C - 160°C)
Superior bleed resistance for printing on 100% polyester performance fabrics
When blended according to formulations, colors will be semi-opaque to opaque
Adjust flash cure temperature and dwell time so ink is just dry to touch. Depending on flash unit, a 2 - 3 second flash is adequate
LC0209 is a low cure and low bleed mixing base. For challenging fabrics using sublimation dyes, a bleed blocking under base such as LC0550 Barrier Grey may be required
NOTE: Poorly dyed polyester or too much heat in the curing process can overcome any low bleed inks ability to block dye migration
Printers should always test the ink on their fabric under their process conditions before printing production runs
The information provided in this document is given in good faith and does not release you from testing inks and fabrics to confirm suitability of substrate and application process to meet your customer standards and specifications